Bentel Omnia 4 Especificações descarregar pdf (Página 89)

10. Press to save parameter 62 and step to parameter 63 for Attributes

Zone 1 (PHASE 2).

11. Program the Attributes for zone 1 (accepted keys 1 through 5).

12. Press to save parameter 63 and step to parameter 64 for Alarm cy-

cles Zone 1 (PHASE 2).

13. Program the number of Alarm cycles for zone 1 (accepted values 0

through 15).

14. Press to save parameter 64 and step back to PHASE 1 step 3.

If is pressed at step 3 ----programming will be quitted. If is

pressed after step 3 ----the current parameter will not be saved and the

control panel will step back to PHASE 1 step 3.

PRESS THE ENTER KEY TO SAVE THE ENTERED PARAMETER VALUE.

Example C

1. Enter the Installer PIN.

LED L7 will flash slowly to signal access to programming ----PHASE 1.

2. Press .

3. Enter a valid Address (e.g. event 325 "SUPERKEY 1" ----refer to "User

Manual").

4. Press ----PHASE 2 ----LED L6 ON: this is a multi-field parameter with

three fields: Calls - Event Code - Voice Message. The first field is for the

telephone numbers that will be called when the event occurs.

5. Program the telephone numbers (accepted keys 1 through 8).

6. Press to save the data in the "Calls" field and step to the "Event

Code" field (PHASE 2).

7. Enter the 2 digit event code for the "SUPERKEY 1" event (accepted keys 0

through 9).

8. Press to save the data in the "Event Code" field and step to the

"Voice Message" field (accepted keys 1 through 8 ----PHASE 2).

9. Select the voice message for the "SUPERKEY 1" event (accepted keys 1

through 8 or key 9 for no message ----refer to User Manual).

10. Press to save the data in the "Voice Message" field and step back to

PHASE 1 step 3.

PROGRAMMING FROM KEYPAD 89

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 111 112

Sem comentários

Bentel Omnia 4 Especificações Página 89