Bentel Omnia 4 Manual do Utilizador descarregar pdf (Página 8)

BENTEL

USER MANUAL

[User Code 1] + [ ]+[ View Logger ]+ [ ]

1. The system alarm memory will be store up to 256 events circular ( 128 on Kyo 4/8/8G

Models). An alarm condition will cause the MEMORY indicator to slow flash.

2. The MEMORY indicator will extinguish once the user clear the alarm memory.

3. Press [ESC] key to exit.

[User Code 1] + [ ]

1. Ensure that the system is not ARMED.

2. Press [User Code 1] and press [ ] into USER Menu mode.

3. Using up / down go to [ Program Code ],then press enter.

4. That’s LCD will display code 1,so you just key in your new 4-6 digit user code,and press

enter.

5. Press [ ESC ] to exit.

[ESC]

1. Once all setting is programmed, press [ESC] key to exit.

[User Code 1] + [ ] + [Program Date/Time]+ [ ]

1. Enter [Program Date / Time] for system timer setting.

2. Change the system time using (A,B,C,D) key to adjust the time.

3. Enter [ ] key to confirm the time.

4. To exit user programming mode, press [ESC] key.

VIEW ALARM MEMORY

PROGRAM SYSTEM TIMER

USER PROGRAMMING MODE

EXIT USER PROGRAMMING MODE

CHANGE USER

CODE 1

1 2 3 4 5 6 7 8 9 10

Sem comentários

Bentel Omnia 4 Manual do Utilizador Página 8